Subaru Impreza Key Problems
subaru car keys replacement Impreza keys allow owners to lock or unlock their vehicle with a simple push of one button. The most common reason for the key fob not working is a dead coin battery inside the key fob.
It is quick and easy. First, locate the small unit that contains the flat round battery inside the key enclosure. Open it and replace the battery, making sure that the correct side is facing up.
Keys lost or stolen
We’ve all been there where you reach into your pocket to grab keys, but they’re nowhere to be seen. Luckily, it’s rarely too hard to find your Subaru keys, and there are many ways to get them replaced quickly and at a low cost.
If you own a normal metal key that you want to use, bring it to a local hardware store or locksmith with Subaru blanks (these are usually marked with “Subaru”) and have them duplicated. You may have to replace the key fob battery too and, in that case, you’ll need a replacement CR-2032 which is available at a majority of hardware stores and a few retailers like Amazon.
You’ll need to visit an subaru Duplicate key dealer or an automotive locksmith to program new keys. You will pay between $50 and $250, based on whether your Subaru features a transponder or smart key.
To get a new lock programmed, you’ll need to give the locksmith or dealership your vehicle identification number (VIN) that is located on the dashboard near the windshield. This number is required to confirm the status of your vehicle’s warranty and ensure that the key has been correct for your Subaru model and year. The VIN also contains details about the manufacturer and where the car was built, and if it has any special features, such as an immobilizer that stops the engine from starting if a incorrect key is used.
Key fob is not working correctly
A key fob that does not work properly can be caused by a number of causes. It could be a simple problem with the battery or it could require a more intricate repair. Some common issues with the Subaru key fob is batteries that have died or has programming issues with the car, and other electrical issues in the vehicle.
One of the simplest fixes is to replace the key fob battery. They can be found in a variety of big-box retailers as well as hardware stores. These cost around $10 each and are easily replaced in a couple of seconds. How to do this should be in the owner’s handbook. YouTube has many videos that guide you through the procedure.
Another reason could be water damage to the key fob. The act of taking it out of the pocket and putting it in the water can affect the retaining clips made of steel that keep the battery in place. If the key fob has problems after replacing the batteries, the issue could be related to the transmitter or other parts of the vehicle. A technician trained in troubleshooting vehicles can examine this and identify the problem. They can reprogramme the key fob to make sure it is compatible with your vehicle. They can also examine for any wiring or antenna issues that might prevent the keyfob from transmitting signal correctly.
Unlocking or locking issues
There are a few possibilities for the subaru outback key Impreza’s key fob not locking or unlocking the doors. This problem can be caused by a dead coin battery, a malfunctioning module and signal interference or water damage. You may have your key fob programmed by a locksmith or dealer.
If you’re not able to open the trunk, it is possible that the lock setting on the key fob is set to “on”. This is a security feature that keeps thieves from taking your car. You can change the setting of the trunk lock/unlock by making contact with your SUBARU dealer.
Another cause of a locked keys in subaru forester steering wheel is when you make a sudden turn and the vehicle locks itself automatically. This happens when the vehicle senses a rapid turn, which could affect its transmission system and engine. Make sure to slow down when turning to avoid this.
Verify that the dealer locksmith has programmed and cut the spare keys or replacement keys you have. Also, ensure that the emergency key is working on all trunk and door cylinders, because these are the only methods to gain access to the car if you’re locked out. Check that the spare key or the new one does not have any scratches or signs on it.
Keyless Entry
Many subaru impreza keys models are equipped with keyless entry, which lets you to lock and unlock the trunk and doors with a pressing of a button your remote. The system utilizes a radio signal to communicate with the vehicle when you are within of the range. There are a variety of systems that can provide this function. They range from basic kits which unlock only the door for the driver to more sophisticated ones that support remote starting and connectivity to smartphones.
It’s convenient and secure to have keyless entry into your Subaru however, you should be aware of what you should do if the buttons stop working. You can try some troubleshooting yourself, however it may be necessary to get your Subaru diagnosed by an expert. In the meantime, you can use these tips to keep your car’s remote control functioning as intended.
If your Subaru’s key fob becomes wet, it’s a great idea to scrub the electronic chip from it using isopropyl alcohol. Let it dry completely before you put the battery back in. This will prevent moisture from damaging your fob and causing problems down the road.
If your key fob isn’t responding, you can turn off the engine by opening the door on the driver’s side. Press the door button one time to unlock it and the second time to close it. You’ll have to press the button a couple of times, usually one for each digit until you hear the chime. Repeat the process for each door until they all respond.
